加拿大留學商科專業申請書
在市場經濟發展迅速的今天，各種申請書頻頻出現，申請書是承載我們?cè)竿驼?qǐng)求的專用書信。寫申請書需要注意哪些問題呢？下面是小編為大家收集的加拿大留學商科專業申請書，僅供參考，歡迎大家閱讀。
Dear x,
An experienced engineer of security printing with China’s Central Bank, Inow would like to scale higher intellectual heights by pursuing Ph. D. studiesin mechanical engineering at your university. I believe that my strongbackground in CAD has adequately prepared me to embark on this endeavor.
I have been working since 1996 for the People’s Bank of China, a Chineseversion of the Federal Reserve, at its unique research institute of securityprinting, with the responsibility of designing the Chinese currency and themachinery to produce it. By engaging me in a variety of projects, the jobafforded me ample exposure to cutting-edge developments in computertechnologies, particularly in CAD software. I have, for example, recentlyredeveloped a purchased CAD (Computer Aided Design) software to make it moresuitable for our own purposes. By adding our own part/subassembly to thedatabase and make our own drawing criteria, we have achieved dramatically betterefficiency.
My job performance, which has won me professional respect from all of mycolleagues, was achieved thanks to the strong background I acquired as a studentin computer science. My undergraduate GPA ranked first among the 63 students ofclassmates in mechanical department, for which I was awarded first-class andsecond-class prizes many times. My graduate GPA ranked among the top 4% of the105 students in my year, which won me the “San Hao” scholarship every yearduring the three years of my graduate studies.
Unlike many other Chinese students, who are content with performing well inexams, I made a point of learning through my own hands-on experiences. In theMaster’s program at the Beijing Institute of Printing, I gained an in-depthunderstanding of artificial intelligence, including expert system and geneticalgorithm, especially in neural network. For my thesis, I programmed amulti-level BP neural network with C language to analyze my mathematical model,and applied much of my knowledge in optimization. I thus became able to programwith a host of different computer languages, especially C++, with which I helpedmy graduate advisor to design a paper-cutting machine. To analyze the mechanismstatically and dynamically, I programmed a software system to analyze andemulate it on screen. In undergraduate studies, I had often programmed withFortran77 and the Basic language.
Upon the completion of my Master’s studies, I easily passed the doctoralrecord examination in CAD/CAM of Beijing University, one f the top universitiesin China. But I gave up the opportunity in order to gain more practicalexperience in the industry. The decision proved to be right, as it guaranteed mebetter access to sophisticated facilities, such as state-of-the-art personalcomputers. With the People’s Bank of China, I have thus accumulated solidexpertise in many kinds of operating and application software systems,particularly in CAD. I now have a firm grip on the latest developments incomputer science in China.
The challenges I met and the successes I achieved at the People’s Bank havenot only endowed me with confidence but also fired off my desire to furtherimprove myself. I have enjoyed high-quality and efficient production with theuse of a kind of PC-based CAD software, MDT, developed by Autodesk Corporation.I now have a dream: some day, every person can design his favorite product withsome sort of CAD software, and then search for an ideal factory over high-speedinternet its production; and the factory will put specifications of the product,as it has received them via the high-speed internet into its CIMS, and out popsthe product, as designed, at the end of the factory’s production line. It is abeautiful dream for every engineer, but many difficulties the speed ofdata-transfer and how to manage the product data among CAD, CAM, CAPP and CAEsystems. These questions are fascinating, and I would like to come up with myown answers to them.
To prepare myself for advanced studies in your country, I have persisted inimproving my English proficiency. As demonstrated by my score of 700 (96%) inthe verbal section of GRE, I now have an adequate command of English forundertaking graduate studies in your program.
After carefully comparing the strengths of many universities, I find MercyUniversity particularly suited for my purpose. It has got the best combinationof quality faculty, many state-of-the-art facilities, and an intriguing academicenvironment. Currently, China still lags significantly behind Western countriesin mechanical engineering. I hope that, with a few years of graduate studiesunder your seasoned guidance, I will be able to return to my motherland and helpbring mechanical engineering in my country to international standards.
Although my ultimate objective is a Ph. D. degree, I am willing to do aMaster’s degree if necessary. In either case, I would like to concentrate mystudies in one or a combination of the following areas: CAD, CAM, CIMS, Computergraphics, Mechanical design, Mechanical manufacturing, Optimization, Artificialintelligence, and Robotics. Your favorable evaluation of my application will behighly appreciated.
Yours sincerely,
加拿大留學商科專業申請條件和費用一覽
一、加拿大留學商科專業申請條件
1、成績
去加拿大讀商科專業，首先必須是還在國內讀書的高中生，或者是高中的畢業生，需要他們?cè)趪?guó)內讀高中的gpa成績和會考成績，需要這兩個條件的成績達到70%以上，加拿大有些的大學要求還更高，需要達到90%。在加拿大，一些非常的大學，學生高考的成績也是有要求的，成績達到一定的要求才可以去申請。如果你申請的大學，你沒有達到這所大學的gpa成績和高考成績的要求的話，你可以與你申請的這所大學的合作大學，去那里讀兩年，考試達到了要求之后就可以申請之前的這所大學了，繼續在這所大學里面完成你后面的學業。
2、語言
去加拿大讀商科專業，不只對你的高中成績又要求，語言也要一些條件，加拿大商科專業的課程，教授都是用英語上課的，如果你的英語能力不好的話，對你上課還是會有一點障礙的。如果去加拿大讀本科的話，商科專業的語言條件是：IELTS的分?jǐn)?shù)是在6.0分以上，如果你要去加拿大讀研究生的商科專業的話，IELTS成績要達到6.5分以上。
3、面試
想要去讀加拿大的商科專業，學校會對學生有一個簡單的面試，這個面試有三種形式，分別是面對面的面試，打電話的面試，還有視頻面試，在面試之前你要提前做好準備，不管是心理上的，還是儀態上的都要準備好，然后把可能會問到的問題提前了解清楚，給面試官留下一個非常好的印象。
4、其他
加拿大商科類的專業，有很多的專業都是需要對口的，有些專業不對口的話，要求學生在管理方面有突出的優勢，有些商科類的專業還需要有相關的工作經歷，加拿大的教育方式跟國內不一樣，他們不止要求學生的成績，學生的實踐能力在他們看來是非常重要的，所以想去加拿大讀商科專業，有做過跟專業相關的工作的話，這對你來說是也一個加分的一項。
二、加拿大留學商科專業的費用
1、學費
去加拿大讀商科專業，先要讀一年的基礎課程，學完基礎的課程考試達到要求之后才能進入商科專業的學習，這些基礎課程的學費每個學校雖然是不同的，但是也不會有很大的差異，在12000加幣到18000加幣上下(62830元到94200元)。進入商科專業的學習之后，每年的學會都會提高，大致是30000加幣(157000元左右)以上。每年的商科專業的學費都是不同的。
2、住宿費
學校的宿舍一般是會設在學校里面或者是學校的附近，這樣方便上學，校內的宿舍有1人間的，費用是1200加幣(6283元)每個月，也有兩人的和多人的，費用總共是8500加元(44500元)，然后看是幾個人住再一起分?jǐn)�。像剛�(cè)ゼ幽么笞x書的學生住在寄宿家庭是很好的，至少你吃飯的問題是不用操心了，你也可以在這里適應加拿大的語言和生活，每個月要收800加幣(4189元)，一年也要9000加幣(47000元)。之后你要是想搬出去住也是可以租房的，合租的房租一般都是400加幣到650加幣之間(20xx元到3400元)，你要是想要找一個條件好一點的房子的話，就要多準備一些房租費用，這些是不夠的.。
3、餐飲費
加拿大有很多的美食，但是都是不便宜的，在外面的餐廳吃一頓飯要10加元到25加元(52元到130元左右)，學校的食堂也是可以的，要是你不喜歡加拿大的飲食習慣的話，可以自己去超市買菜然后做飯吃，費用就能省點一半多了。
4、其他費用
電話費：在加拿大，電話費非常的貴，每個人一個月的電話費在82加元(430元)以上。
醫療費：加拿大的保險費用同樣也是很貴的，他還要求每個學生必須要買這個保險費用，一個月最少是34加元(178元)。
日常消費：買一些日用品、偶爾買一兩件衣服、鞋子、交通的費用、娛樂費等，每個月大概是5000加元(26180元)。
加拿大留學福利盤點
一、項目退稅
首先容易被大部分人忽視的，就是各種稅的退還，在加拿大有著完善的稅收制度，納稅人不僅僅包括已經工作有收入的人群，沒有收入的留學生，也是需要繳稅的，而且可退稅的項目不少。
首先是大家交的學費可以申請退稅，不過需要大家畢業后留在加拿大工作;此外在這里購物不論金額多少，有發票就可以退稅，里面還包括大家買書的開銷，每個月最多可以獲得65加幣的額度。
二、醫療保險
醫保是社會福利的重要組成部分，可以有效地覆蓋參保人在境內的醫療開銷，能夠進行比較高額度的報銷，從而降低生病之后的經濟風險，所以大家一定要記得在辦理入學的同時買好醫保。
留學生享受的是最低費用保額的項目，基礎的保費一年只需要500加幣左右，就能夠享受本國居民的基礎險種，當然大家還可以自己增加其他的項目，費用一起進行繳納即可。
三、國際學生證
加拿大會為學生開本國的學生證，一般是有學生自己遞交申請，然后由學校進行發放，但是作為一個國際化的國家，境內也是承認國際學生證的，由聯合國的教科文組織發放的這一證件，在這里可以享受很不多福利。
申請直接向相關的部門提交，日常中，可以享受很多的折扣福利，覆蓋購物卡沒有覆蓋的領域，同時購買國際機票也可以打折。
四、購物折扣卡
留學生出門購物，不需要辦理各大商場的購物卡，可以直接去相關的部門申請學生專屬的免稅卡，即SPC，地位相當于各種購物卡的綜合體，不管是去哪里進行購物，基本都可以享受優惠。
目前已知的店鋪就有Banana Republic，Jacob，Aldo，Apple，Nike，the bodyshop等，而折扣基本都在10%-15%之間，大家平時出門千萬別忘記帶上它。
【加拿大留學商科專業申請書】相關文章：
英國留學申請書寫作方法04-14
轉專業的申請書（通用5篇）12-26
大一新生專業調整申請書12-24
大學轉專業申請書集合10篇12-21
大專轉專業的申請書（通用7篇）12-26
大一新生專業調整申請書5篇12-24
英語高一必修三加拿大的作文09-22
關于留學的名言01-20